Nano - Basic Full System
A full and complete Nano remote head system, complete with Nano, Jibstick controller, and accessories needed to start operating right out of the box. Case is carry-on friendly.
This Nano System features our new two axis pan/tilt remote head, the Nano. The successor to the Talon head, this little head packs a punch. Weighing in at only eight pounds, the Nano has a twenty-five pound capacity standard (upgradeable). The Nano comes standard with a Mitchell spud and can be used with tripods, cranes, dollies, and more. Comes standard with a lens port on the upright of the Nano. Camera plate height is adjustable with an included wrench.
Included with the Basic System is the Jibstick, our most basic head controller. It allows for plug and play operation, with easy to adjust smoothing and speeds, position or velocity mode control, and no play-repeat capabilities. Zoom and Focus control are only available with the Lens Control Grip (available separately).
The Jibstick has a Control port for head control, a Lens Control port for the Lens Control Grip, and a Serial Set Streaming port for computer integration. The Jibstick comes standard with two, one inch bar clamps mounted to the back.
Lens Control Cables for Canon and Fujinon analog and digital lenses are available separately.
This "mini Talon" is eager to be put to work!
Nano Specs:
Weight: 8 lbs
Capacity: 25 lbs
Overslung and Underslung capable
Voltage: 24 VDC (Upgrade for 24 - 48 VDC operation available)
Amperage: 4A max
Package Contents:
Carry-On Hard Case with Custom Foam Inserts
Nano Remote Head
Jibstick Controller
30ft Control Cable
30ft Power Cable
Nano Power Adapter Cable
Power Supply (110-240VAC) & 10ft Cord
Mitchell Nut & Wrench
8/32 in. Hex Wrench & Tee Handle Wrench
Additional configurations available upon request. Contact us here.
Camera, Zebra, Corvette, and cables pictured in setup photo not included.
A full and complete Nano remote head system, complete with Nano, Jibstick controller, and accessories needed to start operating right out of the box. Case is carry-on friendly.
This Nano System features our new two axis pan/tilt remote head, the Nano. The successor to the Talon head, this little head packs a punch. Weighing in at only eight pounds, the Nano has a twenty-five pound capacity standard (upgradeable). The Nano comes standard with a Mitchell spud and can be used with tripods, cranes, dollies, and more. Comes standard with a lens port on the upright of the Nano. Camera plate height is adjustable with an included wrench.
Included with the Basic System is the Jibstick, our most basic head controller. It allows for plug and play operation, with easy to adjust smoothing and speeds, position or velocity mode control, and no play-repeat capabilities. Zoom and Focus control are only available with the Lens Control Grip (available separately).
The Jibstick has a Control port for head control, a Lens Control port for the Lens Control Grip, and a Serial Set Streaming port for computer integration. The Jibstick comes standard with two, one inch bar clamps mounted to the back.
Lens Control Cables for Canon and Fujinon analog and digital lenses are available separately.
This "mini Talon" is eager to be put to work!
Nano Specs:
Weight: 8 lbs
Capacity: 25 lbs
Overslung and Underslung capable
Voltage: 24 VDC (Upgrade for 24 - 48 VDC operation available)
Amperage: 4A max
Package Contents:
Carry-On Hard Case with Custom Foam Inserts
Nano Remote Head
Jibstick Controller
30ft Control Cable
30ft Power Cable
Nano Power Adapter Cable
Power Supply (110-240VAC) & 10ft Cord
Mitchell Nut & Wrench
8/32 in. Hex Wrench & Tee Handle Wrench
Additional configurations available upon request. Contact us here.
Camera, Zebra, Corvette, and cables pictured in setup photo not included.
A full and complete Nano remote head system, complete with Nano, Jibstick controller, and accessories needed to start operating right out of the box. Case is carry-on friendly.
This Nano System features our new two axis pan/tilt remote head, the Nano. The successor to the Talon head, this little head packs a punch. Weighing in at only eight pounds, the Nano has a twenty-five pound capacity standard (upgradeable). The Nano comes standard with a Mitchell spud and can be used with tripods, cranes, dollies, and more. Comes standard with a lens port on the upright of the Nano. Camera plate height is adjustable with an included wrench.
Included with the Basic System is the Jibstick, our most basic head controller. It allows for plug and play operation, with easy to adjust smoothing and speeds, position or velocity mode control, and no play-repeat capabilities. Zoom and Focus control are only available with the Lens Control Grip (available separately).
The Jibstick has a Control port for head control, a Lens Control port for the Lens Control Grip, and a Serial Set Streaming port for computer integration. The Jibstick comes standard with two, one inch bar clamps mounted to the back.
Lens Control Cables for Canon and Fujinon analog and digital lenses are available separately.
This "mini Talon" is eager to be put to work!
Nano Specs:
Weight: 8 lbs
Capacity: 25 lbs
Overslung and Underslung capable
Voltage: 24 VDC (Upgrade for 24 - 48 VDC operation available)
Amperage: 4A max
Package Contents:
Carry-On Hard Case with Custom Foam Inserts
Nano Remote Head
Jibstick Controller
30ft Control Cable
30ft Power Cable
Nano Power Adapter Cable
Power Supply (110-240VAC) & 10ft Cord
Mitchell Nut & Wrench
8/32 in. Hex Wrench & Tee Handle Wrench
Additional configurations available upon request. Contact us here.
Camera, Zebra, Corvette, and cables pictured in setup photo not included.