Skip to Content
Ravensclaw
 ⌂ Home
Products
Services
Contact
About Us
Search
0
0
Ravensclaw
 ⌂ Home
Products
Services
Contact
About Us
Search
0
0
 ⌂ Home
Products
Services
Contact
About Us
Search
Products Nano Sport Remote Head - Basic Full System
IMG_7010 sport C86 dick hollander.JPG Image 1 of 10
IMG_7010 sport C86 dick hollander.JPG
IMG_7011 sport C86 dick hollander rear.JPG Image 2 of 10
IMG_7011 sport C86 dick hollander rear.JPG
IMG_7017 jibdesk front.JPG Image 3 of 10
IMG_7017 jibdesk front.JPG
IMG_7015 jibdesk rear.JPG Image 4 of 10
IMG_7015 jibdesk rear.JPG
IMG_6999 fiber head side A.JPG Image 5 of 10
IMG_6999 fiber head side A.JPG
IMG_7000 fiber console side B.JPG Image 6 of 10
IMG_7000 fiber console side B.JPG
IMG_7003 fiber rear.JPG Image 7 of 10
IMG_7003 fiber rear.JPG
IMG_7021 single nano ps front.JPG Image 8 of 10
IMG_7021 single nano ps front.JPG
IMG_7023 single nano ps rear.JPG Image 9 of 10
IMG_7023 single nano ps rear.JPG
IMG_7020 sport system fiber cables.JPG Image 10 of 10
IMG_7020 sport system fiber cables.JPG
IMG_7010 sport C86 dick hollander.JPG
IMG_7011 sport C86 dick hollander rear.JPG
IMG_7017 jibdesk front.JPG
IMG_7015 jibdesk rear.JPG
IMG_6999 fiber head side A.JPG
IMG_7000 fiber console side B.JPG
IMG_7003 fiber rear.JPG
IMG_7021 single nano ps front.JPG
IMG_7023 single nano ps rear.JPG
IMG_7020 sport system fiber cables.JPG

Nano Sport Remote Head - Basic Full System

$14,200.00

A full and complete Nano Sport remote head system. With Nano Sport, Jibstick Desk, and accessories needed to start operating right out of the box. This is our basic Sports package, currently in use with MLB, NHL, NFL and NBA. This system is catered to the general needs of sports shooting, but can be adapted from the standard setup to fit your exact needs.

This system features our new offset two axis pan/tilt remote head, the Nano Sport. The successor to the Talon head, this little head packs a punch. Weighing in at only eight pounds, the Nano Sport has a fifteen-pound capacity. The Nano Sport basic system comes standard with a leveling head on a 1 ½ in. Hollaender Speed-Rail mount when purchased as a system.

Featured in this system are our new Fiber Control Units. The units work in pairs, with one unit on the console side and one on the head side. Fiber connection is a single fiber with ST connectors, covering distances up to 12.4 miles (20km). The head and console connection is through a DB15HD DSUB connector. Power is supplied to each unit via a wall-wart power supply. In addition, a 7-pin Control LEMO is available on request. With the optional Control LEMO, the Fiber Unit on the console side can power a console, and the Fiber Unit on the head side can be powered by the head without the need for an external power supply. All River consoles and desks will still need an external power supply.

Also included with this system is the Jibstick Desk, our most basic desk controller. It allows for plug and play operation, with easy to adjust smoothing and speeds, position or velocity mode control, and no play-repeat capabilities. Zoom and Focus control are standard via an encoded wheel, and hall-effect rocker.

The Jibstick has a Control port for head control, a Lens Control port for the Lens Control Grip, and a Serial Set Streaming port for computer integration.

The Jibstick desk has a Control port for head control, and a power port. A Lens Control port for the Lens Control Grip, and a Serial Set Streaming port for computer integration are available on request.

Lens Control Cables for Canon and Fujinon analog and digital lenses are available separately.

This "mini Talon" is eager to be put to work!

Nano Sport Specs:

  • Weight: 8 lbs

  • Capacity: 15 lbs

  • Offset Tilt allows for full 360 degree camera movement without hitting Pan

  • Voltage: 24 VDC (Upgrade for 24 - 48 VDC operation available)

  • Amperage: 4A max

  • Focus / Zoom control capable for Canon and Fujinon

Package Contents:

  • Hard Case with Custom Foam Inserts

  • Nano Sport Remote Head

  • Jibstick Desk (with 24 VDC wall-wart power supply)

  • Fiber Control Units Set (with two, 24 VDC wall-wart power supplies)

  • 50ft Fiber Control Cable – A Side

  • 50ft Fiber Control Cable – B Side

  • 50ft Power Cable

  • Nano Power Adapter Cable

  • Power Supply (110-240VAC) & 10ft Cord

  • Leveling Head and 1 1/2 in. Hollaender Speed-Rail mount

  • 8/32 in. Hex Wrench

Additional configurations available upon request. Contact us here.

Quantity:
Add To Cart

A full and complete Nano Sport remote head system. With Nano Sport, Jibstick Desk, and accessories needed to start operating right out of the box. This is our basic Sports package, currently in use with MLB, NHL, NFL and NBA. This system is catered to the general needs of sports shooting, but can be adapted from the standard setup to fit your exact needs.

This system features our new offset two axis pan/tilt remote head, the Nano Sport. The successor to the Talon head, this little head packs a punch. Weighing in at only eight pounds, the Nano Sport has a fifteen-pound capacity. The Nano Sport basic system comes standard with a leveling head on a 1 ½ in. Hollaender Speed-Rail mount when purchased as a system.

Featured in this system are our new Fiber Control Units. The units work in pairs, with one unit on the console side and one on the head side. Fiber connection is a single fiber with ST connectors, covering distances up to 12.4 miles (20km). The head and console connection is through a DB15HD DSUB connector. Power is supplied to each unit via a wall-wart power supply. In addition, a 7-pin Control LEMO is available on request. With the optional Control LEMO, the Fiber Unit on the console side can power a console, and the Fiber Unit on the head side can be powered by the head without the need for an external power supply. All River consoles and desks will still need an external power supply.

Also included with this system is the Jibstick Desk, our most basic desk controller. It allows for plug and play operation, with easy to adjust smoothing and speeds, position or velocity mode control, and no play-repeat capabilities. Zoom and Focus control are standard via an encoded wheel, and hall-effect rocker.

The Jibstick has a Control port for head control, a Lens Control port for the Lens Control Grip, and a Serial Set Streaming port for computer integration.

The Jibstick desk has a Control port for head control, and a power port. A Lens Control port for the Lens Control Grip, and a Serial Set Streaming port for computer integration are available on request.

Lens Control Cables for Canon and Fujinon analog and digital lenses are available separately.

This "mini Talon" is eager to be put to work!

Nano Sport Specs:

  • Weight: 8 lbs

  • Capacity: 15 lbs

  • Offset Tilt allows for full 360 degree camera movement without hitting Pan

  • Voltage: 24 VDC (Upgrade for 24 - 48 VDC operation available)

  • Amperage: 4A max

  • Focus / Zoom control capable for Canon and Fujinon

Package Contents:

  • Hard Case with Custom Foam Inserts

  • Nano Sport Remote Head

  • Jibstick Desk (with 24 VDC wall-wart power supply)

  • Fiber Control Units Set (with two, 24 VDC wall-wart power supplies)

  • 50ft Fiber Control Cable – A Side

  • 50ft Fiber Control Cable – B Side

  • 50ft Power Cable

  • Nano Power Adapter Cable

  • Power Supply (110-240VAC) & 10ft Cord

  • Leveling Head and 1 1/2 in. Hollaender Speed-Rail mount

  • 8/32 in. Hex Wrench

Additional configurations available upon request. Contact us here.

A full and complete Nano Sport remote head system. With Nano Sport, Jibstick Desk, and accessories needed to start operating right out of the box. This is our basic Sports package, currently in use with MLB, NHL, NFL and NBA. This system is catered to the general needs of sports shooting, but can be adapted from the standard setup to fit your exact needs.

This system features our new offset two axis pan/tilt remote head, the Nano Sport. The successor to the Talon head, this little head packs a punch. Weighing in at only eight pounds, the Nano Sport has a fifteen-pound capacity. The Nano Sport basic system comes standard with a leveling head on a 1 ½ in. Hollaender Speed-Rail mount when purchased as a system.

Featured in this system are our new Fiber Control Units. The units work in pairs, with one unit on the console side and one on the head side. Fiber connection is a single fiber with ST connectors, covering distances up to 12.4 miles (20km). The head and console connection is through a DB15HD DSUB connector. Power is supplied to each unit via a wall-wart power supply. In addition, a 7-pin Control LEMO is available on request. With the optional Control LEMO, the Fiber Unit on the console side can power a console, and the Fiber Unit on the head side can be powered by the head without the need for an external power supply. All River consoles and desks will still need an external power supply.

Also included with this system is the Jibstick Desk, our most basic desk controller. It allows for plug and play operation, with easy to adjust smoothing and speeds, position or velocity mode control, and no play-repeat capabilities. Zoom and Focus control are standard via an encoded wheel, and hall-effect rocker.

The Jibstick has a Control port for head control, a Lens Control port for the Lens Control Grip, and a Serial Set Streaming port for computer integration.

The Jibstick desk has a Control port for head control, and a power port. A Lens Control port for the Lens Control Grip, and a Serial Set Streaming port for computer integration are available on request.

Lens Control Cables for Canon and Fujinon analog and digital lenses are available separately.

This "mini Talon" is eager to be put to work!

Nano Sport Specs:

  • Weight: 8 lbs

  • Capacity: 15 lbs

  • Offset Tilt allows for full 360 degree camera movement without hitting Pan

  • Voltage: 24 VDC (Upgrade for 24 - 48 VDC operation available)

  • Amperage: 4A max

  • Focus / Zoom control capable for Canon and Fujinon

Package Contents:

  • Hard Case with Custom Foam Inserts

  • Nano Sport Remote Head

  • Jibstick Desk (with 24 VDC wall-wart power supply)

  • Fiber Control Units Set (with two, 24 VDC wall-wart power supplies)

  • 50ft Fiber Control Cable – A Side

  • 50ft Fiber Control Cable – B Side

  • 50ft Power Cable

  • Nano Power Adapter Cable

  • Power Supply (110-240VAC) & 10ft Cord

  • Leveling Head and 1 1/2 in. Hollaender Speed-Rail mount

  • 8/32 in. Hex Wrench

Additional configurations available upon request. Contact us here.



New site still in progress. If something seems off, it’s probably because it is. Please be patient while we work through this. Thank you.

Manuals & More
Home
PRODUCTS
Services
Terms & Conditions

Location

608 North Grape Street
Medford, OR 97501

Contact Us

Further questions? Like to leave a comment? We’d love to hear from you!

Email: help@ravensclaw.com
Phone: +1 (541) 488-5271 For Ravensclaw, dial: 2

Copyright © 2025 Ravensclaw, Inc. All rights reserved.