Talon Power Supply
Power Supply for Talon remote heads, 24 VDC output. Also available with a built-in 15 VDC camera power supply. The 33 VDC option is for the Talon High Speed remote head.
Available in the following configurations:
Single: One output for head power only.
Camera/Single: Adds a 15 Volt DC camera power supply within the same enclosure. Camera power is carried through the same cable as head power. Output is to the Camera Power 2-Pin 2B LEMO on the Talon’s Tilt, with a Camera Power Cable.
Camera/Dual: Adds a 15 Volt DC camera power supply within the same enclosure. Camera power outputs to a separate XLR on the front of the power supply enclosure. Separate cabling is needed for camera power.
High Speed: One 33 VDC output for a Talon High Speed. Not for use with Nano or a standard Talon. Features a Camera Power Pass-Through, with an XLR input on the power supply and a 2-Pin 2B LEMO on Tilt.
Dimensions:
Length: 4 5/8 in.
Width: 6 1/4 in.
Height: 3 1/4 in.
High Speed Dimensions:
Length: 9 1/4 in.
Width: 6 1/4 in.
Height: 3 1/4 in.
Power Supply for Talon remote heads, 24 VDC output. Also available with a built-in 15 VDC camera power supply. The 33 VDC option is for the Talon High Speed remote head.
Available in the following configurations:
Single: One output for head power only.
Camera/Single: Adds a 15 Volt DC camera power supply within the same enclosure. Camera power is carried through the same cable as head power. Output is to the Camera Power 2-Pin 2B LEMO on the Talon’s Tilt, with a Camera Power Cable.
Camera/Dual: Adds a 15 Volt DC camera power supply within the same enclosure. Camera power outputs to a separate XLR on the front of the power supply enclosure. Separate cabling is needed for camera power.
High Speed: One 33 VDC output for a Talon High Speed. Not for use with Nano or a standard Talon. Features a Camera Power Pass-Through, with an XLR input on the power supply and a 2-Pin 2B LEMO on Tilt.
Dimensions:
Length: 4 5/8 in.
Width: 6 1/4 in.
Height: 3 1/4 in.
High Speed Dimensions:
Length: 9 1/4 in.
Width: 6 1/4 in.
Height: 3 1/4 in.
Power Supply for Talon remote heads, 24 VDC output. Also available with a built-in 15 VDC camera power supply. The 33 VDC option is for the Talon High Speed remote head.
Available in the following configurations:
Single: One output for head power only.
Camera/Single: Adds a 15 Volt DC camera power supply within the same enclosure. Camera power is carried through the same cable as head power. Output is to the Camera Power 2-Pin 2B LEMO on the Talon’s Tilt, with a Camera Power Cable.
Camera/Dual: Adds a 15 Volt DC camera power supply within the same enclosure. Camera power outputs to a separate XLR on the front of the power supply enclosure. Separate cabling is needed for camera power.
High Speed: One 33 VDC output for a Talon High Speed. Not for use with Nano or a standard Talon. Features a Camera Power Pass-Through, with an XLR input on the power supply and a 2-Pin 2B LEMO on Tilt.
Dimensions:
Length: 4 5/8 in.
Width: 6 1/4 in.
Height: 3 1/4 in.
High Speed Dimensions:
Length: 9 1/4 in.
Width: 6 1/4 in.
Height: 3 1/4 in.